upper control
英 [ˈʌpə(r) kənˈtrəʊl]
美 [ˈʌpər kənˈtroʊl]
网络 上控制; 上位控制
双语例句
- Because bending and being tracked of sound line make torpedo tailing after target to smaller depth, upper limit control trajectory is usually considered in torpedo trajectory design.
由于声线弯曲和***跟踪声线，使***跟踪目标到较浅深度，因此***弹道设计通常有上限控制弹道。 - In the third type, the coil spring is between the upper control arm and spring tower or housing that is part of the front-end sheet-metal work.
螺旋弹簧在上控制臂和弹簧支架或车桥壳之间，而车桥壳是前悬金属板件的一部分。 - Designed the network protocol and upper control software for realizing the communication network.
为实现网络通信设计了网络协议和上层监控软件。 - Development of Handwheel Upper Switch Control System Based on LIN Bus
基于LIN总线的转向盘上开关控制系统研制 - On the condition of the upper control computer's need clarified, the single-chip microcomputer hardware and its software system have been designed.
在明确了上位机工作要求的前提下，设计了单片机硬件系统，也对下位机软件系统做了较详细的设计说明； - Install bolts holding front of suspension crossmember to frame rails under upper control arm.
安装将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。 - The Shuangjiangkou hydropower station is an upper control project of cascade hydropower development in the main stream of Dadu River.
双江口水电站为大渡河干流梯级水电开发的上游控制性工程。 - Movement control-card is adopted as upper control unit of step-motor. By programming the interface in Visual Basic Language, and linking to movement function library, a movement control system based on Windows is realized.
采用运动控制卡作为步进电机的上位控制单元，运用VISUALBASIC来编制软件部分，并与运动函数库链接，开发出Windows平台下的运动控制系统； - Large grain conveying system with the upper control computer
带上位机的PLC控制大型粮食输送系统 - Based on the hypothesis of Xbar-R control chart, the type II error(β risk) of Xbar-R control chart was studied when the Sample's mean at time t lied in different positions between upper control limit and lower control limit of Xbar-R chart.
从Xbar-R控制图的假设检验问题出发，研究了t时刻样本均值（Xbar）和极差（R）处于控制限内不同位置时，Xbar-R控制图假设检验的第二类错误（β风险）问题。 - On the basis of the aim characteristic values of the experimental results, three control lines of statistics were designed, a central line, a upper control limit, a lower control limit in right angle coordinates.
此法是在平面座标系中，根据试验结果的目标特性值，绘出三条具有统计意义的控制线。 - The connection between work stations in large space environment simulator upper control system
大型空间环模设备总控系统工作站间的互连 - In this paper, the message mechanism in the Windows surroundings and the Win32 communication technology are discussed. And a Upper computer control program is programmed with Delphi, this control program can commendably control the digital controller and incept the feedback.
论文还讨论了Windows环境下的消息机制及Win32通信技术，并利用Delphi编制了一个在Windows环境下的上位机主控程序，能够很好的控制下位机及接收反馈。 - The experiment operation, data inputs, data processing and storage, the real-time supervision on the running state of the lab equipment and the hardware's configuration, programming and debugging of PLC through Ethernet are realized by upper level control system.
系统上位机实现实验操作、数据录入、数据处理和保存、实验装置运行状态实时监控以及通过以太网对PLC进行硬件组态、编程、调试等功能； - The upper control computer realizes the monitor of the system, locomotion control arithmetic, and human-computer interaction.
上位控制计算机实现系统的监控、运动控制算法以及人机交互功能； - This system uses PC and motion control cards as the upper control unit. It is digitized, integrated and open.
此实验装置以PC加运动控制卡作为上位控制单元，具有数字化、集成化、开放式的特点。 - Application of the fuzzy predictor in the truck backer upper control system
模糊预测器在倒车系统中的应用 - The coordination of multiple mobile robots, decision making and task assignment are upper level control issues of the robot system.
多移动机器人的协调规划、决策与任务分配问题属于机器人系统上层控制问题。 - It includes the LON general intelligent node, the upper control and supervising configuration platform, and the remote monitoring platform.
它包括LON通用智能节点、上位组态控制和监视平台以及远程监视平台。 - The robot control system is of two-rank control structure, the upper control computer ( upper computer) and the servo controller ( lower controller).
该机器人控制系统为二级控制结构，分为机器人上位控制计算机（上位机）和伺服控制器（下位机）两部分。 - Having established a network formed by upper control unit and nodes, and having accomplished hardware design, network buildup and PCB design included.
根据系统设计方案，构建出由上位控制机和测控节点组成的测控网络，完成系统硬件设计，包括网络的搭建和测控电路的原理设计与PCB板制作。 - Furthermore, a data collect method based of industry control computer is put forward, corresponding software flow is designed and automatical navigation – localization program of upper control machine is weaved.
同时，提出了基于工控机/数据采集卡的实时数据采集方案，并设计出相应的软件流程和编制了上位机自主导航定位程序代码。 - These objects can be easily invoked and applied by upper control algorithms, to enable the safe operation of the hardware resources. 4.
上层控制算法可以方便地调用和设置这些底层对象，实现对硬件资源的安全操作。 - The upper computer mainly includes three parts: the upper computer control system module, LCM display module and touch screen response module.
上位机主要包括上位机控制系统模块、LCM显示模块和触摸屏响应模块三个部分。 - The upper control software is developed using the Microsoft Visual Studio tool in Windows Operating System.
上位机软件是在Windows操作系统下利用MicroSoftVisualStudio开发工具进行开发。 - Extender assembly control system is mainly composed of the upper control the EMS network VCU, engine control unit, engine, generator, generator controller IPU, start machine and high and low voltage wiring harness, into the exhaust system.
增程器总成控制系统主要由上层控制其网络VCU、发动机控制单元EMS、发动机、发电启动一体机、发电机控制器IPU、及高低压线束、进排气系统组成。 - Upper control agents achieves the upper functions of dynamic displaying and storage of the operation status of micro-grid, coordination and control of the components in micro-grid and so on. ( 3) Every agent in designed multi-agent system has features of individual autonomy, self-adaptive and self-connectivity.
上层控制Agent实现了微网运行状态的动态显示存储、微网中各部件的协调控制等功能。 - According to this characteristics, new calibration cycle is proposed, which can improve the performance of radiometer. Finally, upper data control and processing software of the radiometer is designed.
根据该特点制定了新的定标周期，提高了辐射计的性能。最后，设计了上层测控软件。 - The design of the hardware system is divided into three parts: upper control layer, the network communication layer and the intelligent testing node layer.
硬件系统的设计分为三层：上位机控制层、网络通信层和智能测试节点层。 - According to the structure, the design of the monitoring system is divided into three levels, the upper is a computer network, includes the upper control machine, the hot backup industrial control computer, dual redundant Ethernet and network server.
监控系统的设计按结构分为层，其中上层是计算机网络，包括由上位监控机，热备份的工控机，双冗余以太网和网络服务器等。